Accesories      

Dry Running Protection Device:
To prevent the stator damage due to dry running specially
developed temperature sensor is screwed into the stator
wall to monitor the operating temperature. If by any
chance the pump runs dry. The stator temperature would
increase. Roto DRP would switch off the pump at pre set
temperature.
Pressure Switch:
To prevent the pump from damage due to over
pressurization in the discharge as well as low pressures
beyond the capability of the pump. This system trips the
pump and protects the pump as well as the system.
 
 
Gauges (Pressure, Vacuum, Differential) :
These devices are especially important for the system
with dynamic working charecteristics, that require constant
monitoring. The selection of gauge requires consideration
of process, environment, accuracy, dial size, connection &
mounting. It is advised to limit the normal working presure
to 25-75% of the scale of the gauge.
 
Relief Valves:
In addition to relieving excess pressure from closed-top
vessels or piping systems, these normally closed valves
provide system control benefits. It is versatile and widely
utilized valve. Its compact size, ease of setting, readjustment
and reqpeatability, all contribute to its popularity. The
presure setting is done manually.
 
 

Strainers:
A Strainer is an inexpensive "insurance" for protecting
pumps. There is often unwanted matter present which can
cause serious problems. Dust, foreign matter, or even
clumps of product itself, can clog or damage critical &
expensive equipment. Another factor to consider is the cost
of downtime.