enquiry

Wide Throat type inlet allows gravity flow of highly viscous (plastico – Viscous) material on to the augur-on-coupling rod which pushes the substance to the pumping element. Wide Throat Pumps with the twin paddle bridge breaker arrangement at the top are designed for handling extremely difficult media with very high solid content and non – flowing properties.

Available in close coupled and bare shaft configuration. Custom designed hopper is also available on requirement. A variety of construction materials and shaft sealing options are also available.

Standard Hopper & Oversized Hopper

Capacity: up to 200 m3/hr
Pressure: up to 36 bar

Catalogue

Wide Throat ‘WM’ Series Pumps (Standard Bucket)

Size W54 W56 W58 W60 W62 W64 W66 W69 W72 W73
Capacity
  m3/hr
7 12 16 28 35 47 57 90 120 150
  GPM
31 53 70 123 154 207 251 396 528 660
Pressure
  Bar
36 36 36 48 24 18 12 12 12 12
  PSI
522 522 522 696 348 261 174 174 174 174

 

Wide Throat with bridge breaker ‘KM’ Series Pumps (Standard Bucket)

Size K54 K56 K58 K60 K62 K64 K66 K69 K72 K73
Capacity
  m3/hr
5 7 10 17 21 28 34 54 72 100
  GPM
22 31 44 75 92 123 150 238 317 440
Pressure
  Bar
36 36 36 48 24 18 12 12 12 12
  PSI
522 522 522 696 348 261 174 174 174 174

 

Wide Throat ‘WM’ Series Pumps (Over Size Bucket)

Size W54 W56 W58 W60 W62 W64 W66 W69 W72 W73
Capacity
  m3/hr
7 12 16 28 35 47 57 90 120 150
  GPM
31 53 70 123 154 207 251 396 528 660
Pressure
  Bar
36 36 36 48 24 18 12 12 12 12
  PSI
522 522 522 696 348 261 174 174 174 174

 

Wide Throat with bridge breaker ‘KM’ Series Pumps (Over Size Bucket)

Size K54 K56 K58 K60 K62 K64 K66 K69 K72 K73
Capacity
  m3/hr
5 7 10 17 21 28 34 54 72 100
  GPM
22 31 44 75 92 123 150 238 317 440
Pressure
  Bar
36 36 36 48 24 18 12 12 12 12
  PSI
522 522 522 696 348 261 174 174 174 174

WETTABLE HOUSING COMPONENTS:
• Cast Iron • Cast Stainless Steel • Fabricated Steel • Fabricated Stainless Steel

STATOR:
• Natural • Nitrile • High Nitrile • EPDM • Chloro-Sulphonated Rubber • Fluoroelastomer • Aflas • HNBR

ROTOR:
• Tool Steel • Case Hardened Steel • Alloy Steel • Stainless Steel

COUPLING ROD:
• Alloy Steel • Stainless Steel

SHAFT:
• Alloy Steel • Stainless Steel

OTHER EXOTIC MATERIALS:
• Duplex • Super Duplex • Alloy 20 • Haste Alloy

ROTOR SURFACE COATINGS:
• Ceramic Coatings • Tungsten Carbide • Hard Chrome Plating

PROTECTIVE COATINGS:
• Rubber Lining • Epoxy Coatings

Dry Running Protection Device:

To prevent the stator damage due to dry running, specially developed temperature sensor is screwed into the stator wall to monitor the operating temperature. If by any chance the pump runs dry, the stator temperature would increase. Roto DRP would switch off the pump at pre set temperature.

Pressure Switch:

To prevent the pump from damage due to over pressurization in the discharge as well as low pressures beyond the capability of the pump. This system trips the pump and protects the pump as well as the system.

Gauges (Pressure, Vacuum, and Differential):

These devices are especially important for the system with dynamic working characteristics, that require constant monitoring. The selection of gauge requires consideration of process, environment, accuracy, dial size, connection & mounting. It is advised to limit the normal working pressure to 25-75% of the scale of the gauge.

 

Relief Valves:

In addition to relieving excess pressure from closed-top vessels or piping systems, these normally closed valves provide system control benefits. It is versatile and widely utilized valve. Its compact size, ease of setting, readjustment and repeatability, all contribute to its popularity. The pressure setting is done manually.

 

Strainers:

A Strainer is an inexpensive “insurance” for protecting pumps. There is often unwanted matter present which can cause serious problems. Dust, foreign matter or even clumps of product itself, can clog or damage critical & expensive equipment. Another factor to consider is the cost of downtime.

ROTO SEAL CODE ‘N’

MEDIA PROPERTIES: Containing solids or with high viscosites, Exp- sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and wave spring.
PRESSURE RANGE: Up to 25 bar.

ROTO SEAL CODE ‘P’

MEDIA PROPERTIES: Containing solids or with high viscosites, Exp- sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and wave spring.
PRESSURE RANGE: Up to 25 bar.

ROTO SEAL CODE ‘R’

MEDIA PROPERTIES: Containing solids or with high viscosites, Exp- sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and multiple spring.
PRESSURE RANGE: Up to 25 bar.

ROTO SEAL CODE ‘S’

MEDIA PROPERTIES: Containing solids or with high viscosites, Exp- sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 25 bar.

ROTO SEAL CODE ‘T’

MEDIA PROPERTIES: Low up to high viscosity with or without solids, abrasive, adhesives, crystallizing, aggressive and toxic media.
APPLICATIONS: Toxic media, food , pharma, sewage and ceramic slurries.
DESCRIPTION: Double acting, multiple spring, unbalanced and bi-directional.
PRESSURE RANGE: Up to 25 bar.

Paper Industry

Sugar Industry

Agriculture Industry

Chemical Industry

Paint, Varnish & Ink Industry

Mining Industry

Textile

Cosmetics & Herbal

Waste Water

Biogas

Ceramics

Copyright © Roto Pumps Limited 2019. All rights reserved.